Skip to main content
To connect the Latch ACS to Seam, the property manager must perform a set of setup steps in the Latch Mission Control dashboard. Then, the application developer or property manager must establish the connection in Seam. Finally, the property manager must email connection details to Seam.

​
Set Up Latch ACS

The property manager performs most of this procedure. The following instructions identify the steps that the application developer can also perform:
  1. Send an email to integrations@latch.com with the following message: “I would like to connect the following buildings to the partner ‘Seam’: {Name of building}”
  2. Log in to Latch Mission Control at manager.latch.com.
  3. In the Latch Mission Control dashboard, for each building that you’ve connected:
    • In the top menu, click Access.
    • On the Access page, click Doors.
    • On the Doors tab, for each door to which you want to grant access:
      1. Click the door to which you want to grant access.
      2. On the right, click Edit.
      3. Under Partner access, select Seam.
      4. At the top right, click Save.
    • Note the building ID within the URL for this page. You must send the ID of each building you want to connect to Seam. Save the building ID for a later step with further instructions.\

​
Establish Seam Connection

The property manager or application developer must perform the following steps:
  1. Create a Connect Webview, including latch in the set of accepted_providers.
  2. Display the Connect Webview and perform the following steps:
    • If the Connect Webview displays multiple brand options, select Latch.
    • In the Connect a Latch Building dialog, copy and note your Seam Connect ID. You must send this Connect ID to Seam. Save the Connect ID for a later step with further instructions.
    • Click Continue.

​
Email Connection Details to Seam

The property manager must send latch@getseam.com an email with the following information:
I would like to connect the following Latch buildings to my workspace:
  • {Your Seam workspace ID}
  • Latch building IDs:
    • {Latch building ID for each building that you want to connect to Seam}